THE BAD DAD
THE BAD DAD
Couldn't load pickup availability
Long Board. Long Wheelbase. Long Slides. The Bad Dad is the ultimate slide and slub machine. Bringing back the long wheelbases of yesteryear this board is easy to initiate slides, stable at speed, and an all around rip. Accelerated rocker in the standing platform creates a rocker drop that locks in your feet, paired with a mellow concave that keeps them comfortable. To top it all off a very functional kicktail makes popping on and off curbs mid run a breeze. Pick up a Bad Dad and get back to your roots!
The Bad Dad was designed in collaboration with team rider, Nate Blackburn.
Collapsible content
SPECS
Length: 40”(101.6cm)
Width: 9.5”(24.13cm)
Wheelbase: 28-29”(71.12-73.66cm)
CONSTRUCTION
The Bad Dad is crafted out of 8 plies of hard rock Great Lakes Maple and two layers of Triaxial Fiberglass.
ABOUT FOSTER BOARDS
MATERIALS
All of the materials we put into our boards are aimed at being as sustainable as possible.
-The Wood is sourced from a sustainable mill
-The Glue used in our boards is a water based PVA glue for lowest environmental impact
-The Resin used is 29% bio based resin called SuperSap by Entropy Resins
-Basalt and Fiberglass are consider the most sustainable of all reinforcement fabrics. Basalt Fabric is made from Basalt or more commonly know as lava rock. Fiberglass is mainly made from sand something that is very abundant.
-The Inks used in our graphics are water based acrylic inks, significantly less toxic for the environment than the oil based inks used by most in the industry
-The Lacquer used to seal our boards is a waterborne lacquer with extremely low VOC content which leads to less impact on the environment.
GRAPHICS
All of our graphics are hand screen printed in our shop in Seattle, WA.
They are printed using high quality water based inks. Because they are screen printed by hand, slight variations might be present in each board.
All Graphics are created by Gerry Kreuder with a collaboration of ideas from the team.
PROCESS
All of our boards are made from start to finish in our shop in Seattle, WA.
We have strict quality control rules in place throughout the process to insure each and every board that leaves our shop is of the highest quality.
Our CNC machine and programming is able to process material with accuracy better than .001” which guarantees 100 percent accurate boards and specs every time.