THE RESURRECTOR V2
THE RESURRECTOR V2
The Resurrector V2 is our latest update to our micro drop concave. We decided to make everything a little bit smaller this time around. The deck’s standing platform has been shrunk around 3 inches to accommodate the smaller stances of modern riding. The drops come in at .25” and we have removed the rear W orb to free up mobility in the tighter standing platform. Pair all of this with mellow tub concave and this board is ready for anything you throw at it. Pick up the Resurrector V2 today and get to surfing your local hills!
The Resurrector is the brain child of multiple team riders.
Art work straight out of the head of the Chief.
Width at Belly: 9.4”(23.87cm)
Width at Trucks: 8.5”(21.59cm)
The Resurrector V2 is crafted out of 7 plies of hard rock Great Lakes Maple and two layers of Triaxial Fiberglass. The top layer of fiberglass has been tie dyed black, making each board unique.
ABOUT FOSTER BOARDS
All of the materials we put into our boards are aimed at being as sustainable as possible.
-The Wood is sourced from a sustainable mill
-The Glue used in our boards is a water based PVA glue for lowest environmental impact
-The Resin used is 29% bio based resin called SuperSap by Entropy Resins
-The Inks used in our graphics are water based acrylic inks, significantly less toxic for the environment than the oil based inks used by most in the industry
-The Lacquer used to seal our boards is a waterborne lacquer with extremely low VOC content which leads to less impact on the environment.
All of our graphics are hand screen printed in our shop in Seattle, WA.
They are printed using high quality water based inks. Because they are screen printed by hand, slight variations might be present in each board.
All Graphics are created by Gerry Kreuder with a collaboration of ideas from the team.
All of our boards are made from start to finish in our shop in Seattle, WA.
We have strict quality control rules in place throughout the process to insure each and every board that leaves our shop is of the highest quality.
Our CNC machine and programming is able to process material with accuracy better than .001” which guarantees 100 percent accurate boards and specs every time.