Skip to product information
1 of 2



Regular price $190.00 USD
Regular price Sale price $190.00 USD
Sale Sold out

The Vulcan is our midsized freeride single kick offering. The deck features mellow tub concave, rocker, and prominent flares. The flare design was carefully considered to create reference points without cramping your feet. We included two wheelbase options in the front of the deck for fine tuning but only provided one in the rear to insure that the kick tail remains at its optimal pop angle. With this board you’ll be shredding your local hills like never before.


The Vulcan was designed in collaboration with the multiple team members.

Graphic by Gerry Kreuder, AKA, the Chief

View full details

Collapsible content


Length: 38.25”(97.16cm)

Width: 9.4”(23.88cm)

Wheelbase: 24”-24.5”(60.96-62.23cm)


The ,Vulcan is crafted out of 7 plies of hard rock Great Lakes Maple with two layer of triaxial fiberglass. The top layer of fiberglass has been tie dyed black, making each board unique.


Recommended Complete

Trucks: Paris 180mm 43 degree baseplates

Wheels: Free Wheel Co Quincys or Powell Snakes



All of the materials we put into our boards are aimed at being as sustainable as possible.

-The Wood is sourced from a sustainable mill

-The Glue used in our boards is a water based PVA glue for lowest environmental impact

-The Resin used is 29% bio based resin called SuperSap by Entropy Resins

-The Inks used in our graphics are water based acrylic inks, significantly less toxic for the environment than the oil based inks used by most in the industry

-The Lacquer used to seal our boards is a waterborne lacquer with extremely low VOC content which leads to less impact on the environment.


All of our graphics are hand screen printed in our shop in Seattle, WA. 

They are printed using high quality water based inks. Because they are screen printed by hand, slight variations might be present in each board. 

All Graphics are created by Gerry Kreuder with a collaboration of ideas from the team.


All of our boards are made from start to finish in our shop in Seattle, WA. 

We have strict quality control rules in place throughout the process to insure each and every board that leaves our shop is of the highest quality. 

Our CNC machine and programming is able to process material with accuracy better than .001” which guarantees 100 percent accurate boards and specs every time.